User's Manual

Page 96 of 105 User Manual | SRU-8X1X RFID Reader 18000-63
Doc No. 47000001740
|
Version 01
|
2018-12-11
|
released
Confidential
TagScan
To represent the relationship between the tag phase and the RSSI value, it is possible to plot both values by
means of the TagScan.
ᅚ There is only one tag in the field or a tag has been selected.
Ź Click Start to activate the TagScan.
ۆ The phase shifts are seen in the frequency switching. The RSSI value does not change because the
transponder (tag) is not moved.
Figure 60 TagScan: phase shift (due to the channel change), transponder is not moved
ᬅ
Tags shows the number of the tags present in the antenna field
ᬆ
Refresh scans tags in the antenna field anew
ᬇ
Start starts TagScan
ᬈ
Stop stops TagScan
ᬉ
RSSI activates/deactivates the presentation of the RSSI value in the graph
ᬊ
Phase activates/deactivates the presentation of the phase in the graph
ᬋ
shows the phase in form of the rotating arrow
ᬌ
shows the current value of the phase
ᬍ
shows the current RSSI value
ᬎ
Refresh rate sets the interval between the commands
ᬏ
Number of
data points
sets the number of data points in the graph
Tipp
Ź To eliminate the phase shifts, select only one transmission frequency under Expert
settings 1; see 14.7 Expert Settings 1