KAP70600 Wireless Charger Quick starting guide www.kapsys.
Note It is suggested to read the full user guide before using your K A P 7 0 6 0 0 Wireless Charger. An electronic version of this document is available on our website at www.kapsys.com under the Support section.
Getting started 1. Connect one end of USB cable on the Wireless Charger (Type C) and connect the other end on a USB DC power supply (5 Volts). 2. The wireless charger works with most slim protective cases (less than 3mm thick). If the case is heavy duty, made of metal, or your case doubles as a wallet and holds metal cards, charging may not properly function and the case would need to be removed. 3. The SmartVision3 should have the screen facing up. 4. Place the SmartVision3 on Wireless Charger Cradle. 5.
Legal notice and Warranty PRECAUTIONS FOR USE AND RECOMMENDATIONS Read all information before using the device to ensure safe and proper use. • Handle your product with care, do not drop or knock them • Do not disassemble the product as this will void the warranty and may cause damage that may render the product unusable. • Use manufacturer-approved chargers, data cables and other accessories to prevent potential electric shock, fire, explosion or other hazards.
• • • • • Cracked or broken devices, or devices with visible signs of shocks. Failure to respect the precautions for use, accidents, negligence, misuse or use inconsistent with the instructions provided with the device, or commercial use of the product. Use of accessories or connectors not recommended by the manufacturer.
FCCID:2AXFA-KAP70600
