User's Manual

VERSA REMOTE
13
ROUTINE MAINTENANCE:
1. Clean transmitter and
receiver regularly with a damp
cloth and mild detergent.
2. Periodically check receiver
antenna for tightness.
3. Inspect electrical wiring for
wear points or other damage.
Repair as required.
4. Inspect all connections for
looseness or corrosion. Tighten
and/or "seal" as necessary.
MAINTENANCE PRECAUTIONS:
When performing any inspection
or maintenance work on the
VERSA REMOTE system, always
exercise care to prevent injury
to yourself and others or
damage to the equipment. The
following are general
precautions that should be
closely followed in carrying out
any maintenance work.
1. Do not have hydraulic power
available to the valves when
performing electrical tests or
downloading programs.
2. Never operate or test any
function if any person is in an
area where they could be hurt
by being hit or squeezed by the
hydraulic equipment.
3. Turn power off before
connecting or disconnecting
valve coils or other electrical
loads.
TROUB
LESHOOTING:
This section provides basic
operator level troubleshooting
for the VERSA REMOTE system.
If, after following these
instructions, the system still
does not function, check the
hydraulic system then contact
your KAR-TECH representative
for further instructions or
servicing.