User manual

Smart Lock

Smart Lock allows you to bypass PIN or Password, and unlock your

device if it is at a trusted place, connected to a trusted device, or

when one of the lock screen method other than Swipe unlock is set

To enable Smart Lock, go to → →Security→ Smart Lock

Settings, Networks, and

Applications

Your phone can connect to various networks and devices. You can

also transfer files to/from your PC through the data cable.

Connect to the Internet

Go to → →Network & Internet → Data usage and

switch on Cellular Data.

You might also need to configure the access point name for the

data connection to work.

To configure the access point name:

Go to → →Network & Internet→Mobile

network→Access Point Names and select the access point

name from the list.

By default, the access point name gets configured once you insert the

SIM, Or, your network provider sends the access point name settings

via SMS. You may need to install these settings. If the access point

names are not listed by default, please contact your network provider

for the same.