User manual

Titanium S30

2.3

Charging

the

battery

The rechargeable Li-ion battery that comes with your phone is ready

to be used, but is not charged. It is easy to do & can be done in 4

simple steps below:

1. Connect the charger to your phone, and plug it into a socket.

2. The battery indicator in the corner of the screen will scroll to

show you it’s charging.

3. When fully charged, the battery indicator will stop scrolling.

4. Disconnect the charger from your mobile, and unplug.

2.4

Power

ON/OFF

Press the power key to power-ON/OFF the phone.

When you turn your phone on, it’ll automatically check the SIM and

show the following information on screen:

Input SIM1 PIN: If you’ve set a PIN for your SIM1.

Note:

The PIN is supplied with your SIM. Please replace it with your own PIN

code as soon as possible. Enter the wrong PIN three times, and your SIM

will be locked. Then you’ll need to contact your network service provider

to ask for a PUK code to unlock it. It is applicable for both the SIMs if you

are using 2 SIM Cards.

2.5

Enter

Main

In Idle mode, press the Menu key to enter the main menu on the

desktop and click the Home key to return.

2.6

Enter

Sub

Once at the main menu, click the icon to select the submenu, press

Back Key to return to the previous menu, and press the Home Screen

to return to the home screen.

2.7

Use

Notification

Panel

As a new notification appears in the notification area, slide down in

the area to view the contents of the notification.