Operation Manual

26 - EN
To see what stations are present on the found ensemble/multiplex, just turn the
Tune/Select knob, it will automatically select the next station. Once you have
reached the last station in the found ensemble, it will revert back to the rst station
again. If you wish to exit the manual tuning mode press the Tune/Select knob.
FM Mode
1. Switching from DAB+ to FM
In order to switch the radio from DAB+ to FM mode, you need to press the DAB+/
FM key once. The display will show:
2
1
2. Auto Scan
To search for an FM station, you need to press and then release the Auto Scan
key. This will start scanning up the frequency band. To scan down the frequency
band, press and hold the Auto Scan key. Once a station has been found the turn
will stop automatically.
3. Manual Tuning
To select a station manually turn the Tune/Select knob to the desired frequency.
4. Storing Stations
To procedure to store radio stations is the same as for DAB+ mode.
5. Display Modes and Menu in FM Mode
When you press the Info/Menu key repeatedly, the display will cycle through the
following display modes:
Press and hold the Info/Menu key for 2 seconds to enter the MENU mode.
Browse through the menu by pressing Info/Menu repeatedly.
You can open each menu option by pressing down on the Tune/Select knob and
set a required value by rotating it. Conrm your settings by pressing down on the
Tune/Select knob again.
Displays the current time.
Displays the remaining sleep time.
Displays the currently selected frequency.