Operation Manual

EN | 25
EN
Set Clock
1. Press the MODE button again and the clock hour digits blink.
2. Press the / button to set hour.
3. Press the MODE button and clock minute digits blink.
4. Press the / button to set minute.
Exit setting mode
To save all settings, press the SNOOZE button or wait for a few seconds to exit the setting mode.
Alarm Operation
The unit incorporates dual alarm timer, alarm 1 and alarm 2. You may set the two alarm time individu-
ally.
When the unit is OFF (Standby mode):
Setting the alarm1 time
1. Press and hold the ALARM ON/OFF button until the alarm1
indicator blink and the alarm1
hour digits blink as well.
2. Press / button to set alarm1 hour.
3. Press the ALARM ON/OFF button again and the alarm1 minute digits blink.
4. Press / button to set alarm1 minute.
Select alarm1 wake up source
5. Press the ALARM ON/OFF button and alarm source indicator “bU” (buzzer), “rAd” (radio), “Cd”
(CD) or “USb-Sd” (USB/SD) blinks on display.
6. Press the / button to select alarm source buzzer, radio, CD or USB/SD.
Set maximum alarm1 volume level
7. Press the ALARM ON/OFF button again, maximum alarm volume level indicator “ L (level digits)”
blinks.
8. Press the / button to select maximum alarm volume level, where you can select the level
between 10 and 30 (inclusive).
Save settings
9. To save all settings and exit the setting mode, press the SNOOZE button or wait for a few sec-
onds.
Setting the alarm2 time
1. Press and hold the ALARM ON/OFF button until the alarm1
indicator blinks.
2. Press the ALARM ON/OFF button repeatedly until the alarm2
indicator blinks.
3. Press / button to set alarm2 hour.
4. Press the ALARM ON/OFF button again and the alarm2 minute digits blink.
5. Press / button to set alarm2 minute.
Select alarm2 wake up source
6. Press the ALARM ON/OFF button and alarm source indicator “bU” (buzzer), “rAd” (radio), “Cd”
(CD) or USb-Sd (USB/SD) blinks on display.
7. Press the / button to select alarm source buzzer, radio, CD or USB/SD.
Set maximum alarm2 volume level
8. Press the ALARM ON/OFF button again, maximum alarm volume level indicator “ L (level digits)”
blinks.
9. Press the / button to select maximum alarm volume level, where you can select the level
between 10 and 30 (inclusive).
Save settings
10. To save all settings and exit the setting mode, press the SNOOZE button or wait for a few sec-
onds.
Enable alarm function
To activate the daily alarm, press the ALARM ON/OFF button and the corresponding alarm source
indicator ( alarm1
/ alarm2 ) should appear on the LCD display.