Operation Manual

24 | EN
Clock setting
The device must be in the standby mode.
1. Press and hold MEM /C-ADJ. until the time will display 12-hour or 24-hour digit ashing.
2. Press ►►SKIP/TUN. UP or ◄◄SKIP/TUN. DOWN to adjust the 12-hour or 24-hour digit.
3. Press the MEM /C-AD J. button again. The hour indication “00” ashes. Press ►►SKIP/TUN.
UP or ◄◄SKIP/TUN. DOWN to adjust the hours.
4. Press the MEM /C-AD J. button again. The minute indication “00” ashes. Press ►►SKIP/TUN.
UP or ◄◄SKIP/TUN. DOWN to adjust the minutes.
5. Press the MEM /C-ADJ. button again to conrm the clock settings.
Note:
If within approx. 10 seconds no key is pressed, the setting mode will be canceled and the appliance
returns to the last mode.
Timer setting
The device must be in the standby mode and the clock must be set.
1. Press once the TIMER button. The symbol “ ON” and “00:00” are shown on the display and the
hour digits will ash (see gure F1).
2. Press ►►SKIP/TUN. UP or ◄◄SKIP/TUN. DOWN to adjust the hours.
3. Press the TIMER button again. The minute indication ashes. Press ►►SKIP/TUN. UP or
◄◄SKIP/ TUN. DOWN to adjust the minutes.
4. Press the TIMER button again to conrm the turning on time of the timer.
5. The symbol “ OFF” and “00:00” is shown on the display and the hour digits will ash (see gure
F2).
6. Repeat steps 2 to 3 and then conrm the turning off time of the time by pressing the TIMER but-
ton.
7. Press ►►SKIP/TUN. UP or ◄◄SKIP/TUN. DOWN to select the operation mode “TUNER” or
“CD” for the adjusted turning on time.
8. Press the TIMER button again. The indication “VOL ” ashes on the display. Press ►►SKIP/
TUN. UP or ◄◄SKIP/TUN. DOWN to adjust the desired volume of the sound.
9. Conrm again with the TIMER button. The timer settings will be shown on the display one after
the other.
10. The appliance will be turned on automatically at the adjusted turning on time, switches to the
preset operation mode and will automatically shut off at the adjusted off time.
Notes:
• If within approx. 10 seconds no key is pressed, the setting mode will be canceled and the appli-
ance returns to the last mode.
• If the display shows “ERROR” while setting the turning on time of the timer, then the time for turn-
ing on and off is identical. In this case, please set the off time rst.
Disabling or modifying of the timer settings:
Disable: Press briey the TIMER button. The symbol “ ” disappears on the display.
Modify: Press and hold the TIMER button for more than 1 second. Now you can modify the timer set-
tings beginning at step 2 at the “Timer settings” section.
Sleep function
1. If you want to fall asleep to music, press the SLEEP button.
2. You can select the period until turning off automatically: 90, 80, 70 etc. up to 10 minutes. The
sleep function can be adjusted during the radio, CD or cassette operation.