Operation Manual

EN | 25

Equalizer

Pressing EQ shows the current adjusted sound effect.

Select the desired sound effect by repeated pressing of EQ:

“PASS” means that the equalizer function is deactivated.

Function selector

Each time you press FUNCTION, you can select a different operating mode, see below:

Radio

• Turn on the appliance by pressing the STANDBY/ON button and press repeatedly the FUNC-

TION button until “TUNER” is shown on the display.

Manual tuning

To tune for weak stations: Press ►►SKIP/TUN. UP or ◄◄SKIP/TUN. DOWN, until the correct fre-

quency is shown, or until you achieve the best reception quality.

Automatic tuning

1. Press and hold ►►SKIP/TUN. UP or ◄◄SKIP/TUN. DOWN at least one second. Then release

the button. The tuner scans automatically for the rst radio station with sufcient signal strength.

2. To select another radio station, repeat the procedure above.

Mono/Stereo

This function can only be used in FM mode.

1. If you cannot select a FM stereo station, press the MONO/ST. button. On the Display the indica-

tion “STEREO” is shown. When you receive a FM stereo station the symbol “ ” will appear on

the display.

2. If you press the MONO/ST. button again, the display will show “MONO” and the FM stereo indica-

tion “ ” will disappear. The appliance will switches to the FM mono operation mode.

Programming of preset radio stations

You can also store your favorite stations in the program memory (up to 30 FM stations).

1. Repeatedly press the FUNCTION button until “TUNER” is shown on the display.

2. Tune the desired radio station.

3. Press the MEM/C-ADJ. button.

4. Press the PRESET /FOLDER (◄ or ►) or PRESET FOL (UP or DN) on the remote control to

select the desired memory number.

5. Press the MEM /C-ADJ. button again to conrm the selection.

6. For storing additional radio stations, please repeat the steps 2 to 5.

7. For replacing the stored radio stations, please repeat the steps 2 to 5.

Notes:

• If within approx. 8 seconds no button is pressed, the storing mode will be canceled and the appli-

ance returns to the last mode.

• Storing a new station into a preset location will erase the previously stored radio station in that

location.

• To delete all the preset station press and hold the ►/|| PLAY /PAUSE button in standby mode

until the STANDBY LED and the LCD will ash once.