Operation Manual

EN | 31
EN
Tape Player
Poor sound quality
Head, capstan or pinch rollers dirty. Clean head, capstan and pinch
rollers.
Remote control
No function.
The batteries are inserted in the
wrong direction.
The batteries are exhausted.
The remote control is not directed
towards the device.
There are obstacles between remote
control and the remote control sen-
sor.
The operation range is exceeded.
Check the polarity of the inserted
batteries.
Replace the batteries.
Direct the remote control directly
towards the remote control sensor
on the front of the device.
Remove the obstacles.
The remote control has an operation
range of 6 meters.
Headphones
No sound
The headphones jack is not plugged
in correctly.
Volume is set too low.
The CD is damaged.
Plug in the headphones jack cor-
rectly.
Adjust the volume.
Replace the CD.
Backup batteries
Preset is lost after
power outage
No backup batteries inserted.
The backup batteries are exhausted.
Insert backup batteries.
Replace the backup batteries.
TECHNICAL SPECIFICATIONS
General
Power Supply: 100-240V ~ 50/60Hz
Radio
Frequency Range: FM 87.5 - 108 MHz
Cassette Player
Tape Speed: 4.75 CM/SEC.
Frequency Response: 125 Hz – 8 kHz
CD Player
Optical Pickup: 3 - Beam Laser
Frequency Response: 100 Hz – 16 kHz
Dimensions: 482 (L) x 234 (W) x 95.3 (H) mm
Net Weight: 2.63 kg
Technical specications and design may change without notice.