Operation Manual

28 | EN
• Due to the various methods of compression it is possible that some discs can not be played. If no
disc or can’t read TOC, NO DISC will be displayed (F4).
Playing The Entire CD/MP3/WMA
- CD
1. Insert the CD disc into the CD compartment, the main unit will automatically
read the total number of the folders and tracks at the same time.
2. Press the PLAY/PAUSE/ENTER button, the unit will play the rst track of the
CD disc automatically (F5).
3. Press the PLAY/PAUSE/ENTER button once again, the time elapsed indica-
tor will ash (F6).
4. Press SKIP/TUNE SEARCH(UP or DOWN) button once to change Track
NO., and press long is fast forward function or rewind function.
5. To resume playback, press the PLAY/PAUSE/ENTER button once more
again.
6. To stop playback, press the STOP/MENU button once on the unit (or remote
control).
- MP3/WMA
1. Insert the MP3/WMA disc into the CD compartment, the main unit will automatically read the total
number of the folders and tracks at the same time.
2. Press the PLAY/PAUSE/ENTER button, the unit will play the rst track of the CD disc automati-
cally (F7).
3. Press the PLAY/PAUSE/ENTER button once again, the time elapsed indicator will ash (F8).
4. To change Track NO., Press SKIP/TUNE SEARCH(UP or DOWN) button once. And press long is
fast forward function or rewind function.
5. To resume playback, press the PLAY/PAUSE/ENTER button once more again.
6. To change the ALBUM NO., press the PRESET/FOLDER UP or PRESET/FOLDER DN button
once.
7. To stop playback, press the STOP/MENU button once on the unit (or remote control).
Note: If the main unit is not working properly, disconnect the power source and then reconnect it again.
ID3 OPERATION (on the remote control)
In MP3/WMA mode:
1. Press the ID3/MONO/ST. button once to open the ID3 function.
2. If the MP3/WMA le is write in “ID3” it will automatically to search the information of “TITLE
NAME”, “ARTIST NAME”and “ALBUM NAME” indicated on the display .
3. Press the ID3/MONO/ST. button on the remote again. Then the unit will resume to play normally.
USB/SD CARD OPERATION
In STANDBY mode:
1. Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY button on the main
unit (or remote control) to power”ON” the unit.
2. Press the FUNCTION button on the main unit (or remote control) to select the USB or SD/MMC
mode. The main unit will automatically read the total number of the folders and tracks at the same
time (F9).
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER (UP or DOWN) button to select each folder.
b. Press the SKIP/TUNE SEARCH(UP or DOWN) button to select current track in desired folder.
4. If the MP3 and WMA are written in “ID3”.
a. During the unit in the MP3 or WMA playing. Press the ID3/MONO/STEREO button once. The
display will shows a “ID3 ON”, and then it will automatically to search more than 64 letters of
“TITLE NAME”, “ARTIST NAME” or “ALBUM NAME” which move from the right corner to the left