Operation Manual

26 | EN
- MP3/WMA
1. Insert the MP3/WMA disc into the CD compartment, the main unit will automatically read the total
number of the folders and tracks at the same time.
2. Press the PLAY/PAUSE button, the unit will play the rst track of the CD disc automatically.(F7)
3. Press the PLAY/PAUSE button once again, the time elapsed indicator will ash.(F8)
4. To change Track NO., Press SKIP/TUNE SEARCH(UP or DOWN) button once. Press and hold
the SKIP/TUNE SEARCH (UP or DOWN) button once to skip fast forward or backward of each
song.
5. To resume playback, press the PLAY/PAUSE button once more again.
6. To change the ALBUM NO., press the PRESET/FOLDER (UP or DOWN) button once.
7. To stop playback, press the STOP button once on the unit (or remote control).
ID3 OPERATION (on remote control)
In MP3/WMA mode
1. Press the ID3/MONO/ST. button once to open the ID3 function.
2. If the MP3/WMA le is written “ID3”, it will automatically search the information of “TITLE NAME”,
“ARTIST NAME” and “ALBUM NAME” indicated on the display .
3. Press the ID3/MONO/ST. button on the remote again. Then the unit will resume to play normally
USB/SD CARD OPERATION
In STANDBY mode
1. Insert the USB DEVICE or SD/MMC CARD, and then press the STANDBY button on the main
unit (or remote control) to power ”ON” the unit.
2. Press the FUNCTION button on the main unit (or remote control) to select the USB or SD/MMC
mode. The main unit will automatically read the total number of the folders and tracks at the same
time. (F9)
3. If the USB memory device more than one folder.
a. Press the PRESET/FOLDER (UP or DOWN) button to select each folder.
b. Press the SKIP/TUNE SEARCH(UP or DOWN) button to select current track in desired folder.
4. If the MP3 and WMA are written in “ID3”.
a. During the unit in the MP3 or WMA playing. Press the ID3/MO./ST. button once. The display
will show “ID3 ON”, and then it will automatically search more than 64 letters for “TITLE NAME”,
“ARTIST NAME” or “ALBUM NAME” which move from the right corner to the left corner on the
display continuously.
b. Press the ID3/MO./ST. button once again. The display will show a “ID3 OFF”, and then the
main unit will play normally.
Notes:
• In USB/SD mode MP3 and WMA les can be played. Due to numerous methods of compression
it could be that some les cannot be played.
• This unit can support most of USB devices and SD/MMC/SDHC cards (up-to 32GB memory
capacity for SDHC). It cannot access (or, need longer time to access) those devices with big
memory capacity.
• It can support USB version 1.1 and 2.0.