Operation Manual
14 | EN
USB Playback
1. While the unit is turned off, insert a USB stick into the USB port at the front of the unit.
2. Turn the unit on. With a USB stick inserted, the unit switches to USB mode automatically. If not,
press the USB button.
3. The USB stick will be read and playback will start automatically with the rst track found.
4. To pause playback, press the PLAY/PAUSE button. Press the button again to resume play-
back.
5. To jump to the previous track, press the PREV button.
6. To jump to the next track, press the NEXT button.
7. To fast forward the currently playing track, press the NEXT button. Once you reach the de-
sired section of the track, release the button to resume normal playback.
8. To fast rewind the currently playing track, press and hold the PREV button. Once you reach
the desired section of the track, release the button to resume normal playback.
Notes:
• A USB device must always be connected directly to the USB port of this product. The use of a
USB extension cord is not supported by this product. The USB port of this product cannot com-
municate with a computer directly.
• The reading time for a USB drive varies depending on the speed of the memory device and the
number of songs and folders. In some cases the reading time may be as long as 60 seconds.
• Always switch off the unit before removing a USB ash drive to prevent damage to your USB
device. The manufacturer is not responsible for the loss or damage of data.
• Due to numerous methods of compression it could be that some les or USB ash drives cannot
be played.
AUX Input
You can connect the audio output of an external device such as an MP3 player to this unit to listen to
the sound of that device through the amplier of this music system.
1. To connect the external device please use a standard stereo audio cable (3.5 mm to 3.5 mm
plugs) (not included) to connect the headphone out or audio line out of the external device to the
AUX input socket of this unit.
2. Turn the unit on.
3. Press the AUX IN button on the unit.
4. Switch the external device (e.g. MP3 player) on.
5. Start playback of the external device and adjust the volume control of the main unit to the desired
level.
6. Remember to switch off the unit when you are nished using the external device.
Note:
• AUX connection will not be detected automatically like USB. You need to select AUX mode
manually by pressing the AUX IN button.