Operating instructions

ManualsBrandsKärcher ManualsDry vacuum cleanersCV 30/1

Table Of Contents

- - - - n WARNING
        n WARNING
        n WARNING
        n WARNING
        These are only brief instructions! Please read the operating instructions accompanying the device prior to using or maintaining the device.
        These are only brief instructions! Please read the operating instructions accompanying the device prior to using or maintaining the device.
        The non-compliance with the operating and safety instructions may lead to damage of the appliance and to risks for the operator and other persons.
        The non-compliance with the operating and safety instructions may lead to damage of the appliance and to risks for the operator and other persons.
- - - - Start up
        Start up
        Start up
    - - 1
        1
        1
        A CV 38/2
        A CV 38/2
        A CV 38/2
        A CV 38/2
        B CV 48/2
        B CV 48/2
      - 2
        2
        2
        A
        A
        A
        D
        D
        B
        B
        B
        E
        E
        C
        C
        C
        A Swivel cable hook upward and completely remove the mains cable from the device.
        A Swivel cable hook upward and completely remove the mains cable from the device.
        A Swivel cable hook upward and completely remove the mains cable from the device.
        A Swivel cable hook upward and completely remove the mains cable from the device.
        B Open the holder of the handle.
        B Open the holder of the handle.
        C Adjust the handle.
        C Adjust the handle.
        D Close the holder of the handle.
        D Close the holder of the handle.
        E Tilt the appliance backwards and drive it to the place of use.
        E Tilt the appliance backwards and drive it to the place of use.
- - - - Operation
        Operation
        Operation
- - - - Finish operation
        Finish operation
    - - 6
        6
        6
        A
        A
        A
        B
        B
        B
        Turn off the appliance.
        Turn off the appliance.
        Turn off the appliance.
        A Switch off the appliance at the main switch.
        A Switch off the appliance at the main switch.
        A Switch off the appliance at the main switch.
        B Pull out the mains plug.
        B Pull out the mains plug.
        Wind the mains cable around the cable holders.

QUICKSTART

5.964-157.0 01/15

몇

WARNING

These are only brief instructions! Please read the operating instructions accompanying

the device prior to using or maintaining the device.

The non-compliance with the operating and safety instructions may lead to damage

of the appliance and to risks for the operator and other persons.

Start up

ACV 38/2

BCV 48/2

C A Swivel cable hook upward and completely

remove the mains cable from the device.

B Open the holder of the handle.

C Adjust the handle.

D Close the holder of the handle.

E Tilt the appliance backwards and drive it

to the place of use.

Operation

A B Turning on the Appliance

A Plug in the mains plug.

B Switch on the appliance at the main switch.

CV 38/2 – CV 48/2

Summary of content (2 pages)

PAGE 1
QUICKSTART CV 38/2 – CV 48/2 몇 WARNING These are only brief instructions! Please read the operating instructions accompanying the device prior to using or maintaining the device. The non-compliance with the operating and safety instructions may lead to damage of the appliance and to risks for the operator and other persons. Start up 1 2 A CV 38/2 B CV 48/2 A B D E C A Swivel cable hook upward and completely remove the mains cable from the device. B Open the holder of the handle.
PAGE 2
QUICKSTART Operation 4 5 A B C Brush roller operation ATTENTION Risk of damage to the floor covering. Do not operate the appliance on the spot. A Set the pile height via the adjustment knob of the brush head. B Push the unlocking mechanism of the brush head and tilt the handle backwards. Brush motor switches on. Perform the cleaning operation. C The electronic brush control continuously monitors the work of the brush roller. No light Brush roller is working properly.