® G3200XH 2 Español 15 Français 29 C A H D U ! English 8.750-939.
HIGH PRESSURE WASHER OPERATOR MANUAL Model Overview 3 Important Safety Instructions 4 Assembly Instructions 5 Operating Instructions 7 Using the Accessories 9 Working With Detergents 10 Taking a Break 10 Shutting Down & Clean-Up 11 Winterizing and Long-Term Storage 11 Maintenance Instructions 11 Cleaning Tips 12 Troubleshooting 13 Specifications G3200 XH Operating Pressure 3200 PSI Water Volume 2.8 GPM Detergent Suction .15 - .20 GPM Engine Honda GX200 Part No. 1.107-156.
MODEL OVERVIEW 1 4 12 2 3 ! D U A H C 5 9 6 10 7 8 11 1 Handle 8 Water Inlet With Garden Hose Connector 2 Trigger Gun 9 Quick Connect High Pressure Outlet 3 Trigger Gun Safety Lock 10 Detergent Tank 4 High Pressure Hose 11 Detergent Metering Valve and Detergent 5 Gas Tank 6 Spray Wand 12 7 Dipstick For Engine Details See Engine Manual Suction Tube Quick Connect Nozzles English 3
IMPORTANT SAFETY INSTRUCTIONS ■ Read the operating instructions of the engine manufacturer before start-up and follow the safety instructions carefully. ■ WARNING When using this product, basic precautions should always be followed, including the following: ■ Read all instructions before using product. ■ To reduce the risk of injury, close supervision is necessary when a product is used near children. ■ Know how to stop the product and bleed pressures quickly.
WATER SUPPLY (Cold Water Only) CAUTION When connecting to water supply mains, local regulations of your municipal water company must be observed. In some areas connecting directly to public drinking water supply may require a backflow prevention device. This is to ensure that there is no feedback of chemicals into the water supply. Use a water filter to avoid potential damage from dirt in the water supply. ■ Garden hose must be at least 5/8 inch diameter.
Description Purpose Illustration G Tank Detergent tank 1 H Spray Gun Spray Gun Assembly 1 I Quick Connect Nozzle Kit (5 pc.) Nozzles Kit Assembly 1 J Wand Wand Assembly 1 Qty Assembling Scan QR Code with smartphone for detailed instructions STEP 1: STEP 3: Insert joints (A) into handle. Use one 1/4" bolt (C) and tighten with one 1/4" nut (B) on each Mount the detergent tank (G) to the bumper, insert anchor rivets (F) and install them by using a phillips screwdriver. side.