Operating instructions

28 English
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)
Technical data
Subject to technical modifications.
Vibration value
몇 WARNING
The specified vibration value was measured using a
standard test procedure and may be used to compare
devices.
The specified vibration value may be used in a provi-
sional assessment of the load.
Depending on the way the device is used, the vibration
emission can deviate from the specified overall value
during the current use of the device.
Device with a hand-arm vibration value >
2.5 m/s² (see chapter Technical Data in the
operating instructions)
몇 CAUTION ● Uninterrupted use of the device
for several hours can lead to numbness.
● Wear warm
gloves to protect your hands.
● Take regular breaks
from work.
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Cordless chainsaw
Type: 1.444-05x.x
Currently applicable EU Directives
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
2000/14/EC (+2005/88/EC)
Harmonised standards used
EN 50581: 2012
EN 55014-1: 2017
EN 55014-2: 2015
EN 60745-1:2009+A11:2010
EN 60745-2-13:2009+A1:2010
Conformity evaluation procedure used
2000/14/EC and amended by 2005/88/EC: Appendix V
Sound power level dB(A)
Measured:102,2
Guaranteed:104
Notified body, 0197 TÜV Rheinland LGA Products
GmbH; Tillystraße 2 D - 90431 Nürnberg, Germany has
carried out EC type approval, certificate number: BM
50455772 0001
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: [phone]
Fax: [phone]
Winnenden, 2018/09/01
Fault Cause Rectification
The device does not start
up
Battery pack is empty  Charge the battery pack.
Battery pack is defective.  Replace the battery pack.
Battery pack is not inserted correctly.  Push the battery pack into the mounting
until it latches into place.
The device stops during
operation
The battery has overheated  Stop working and allow the battery to cool
down to normal battery temperature.
Motor has overheated  Stop working and allow the motor to cool
down.
CNS 36-
35
Device performance data
Working voltage of the battery V 36
No-load chain speed m/s 21
Chain oil tank volume ml 190
Determined values in acc. with EN 60745-1, EN
60745-2-13
Sound pressure level L
pA
dB(A) 91,2
Uncertainty K
pA
dB(A) 3,0
Sound power level L
wA
dB(A) 102,2
Uncertainty K
WA
dB(A) 1,8
Front handle hand-arm vibration
value
m/s
2
3,6
Rear handle hand-arm vibration
value
m/s
2
4,9
Uncertainty K m/s
2
1,5
Dimensions and weights
Length x width x height mm 834 x
222 x
235
Guide rail length mm 356
Cutting length mm 300
Chain pitch in (mm) 0,375
(9,525)
Weight (without battery pack) kg 4,3
Chairman of the Board of Management
Director Regulatory Affairs & Certification
H. Jenner
S. Reiser