Product Manual

English 11

STEP 1:
Install the Vario Power Spray Wand.
Set the spray wand to the low-pres-
sure setting (Mix).
 STEP 2:
Fill the detergent tank with Karcher
detergent and position the tank into
its storage area. Insert the suction
tube with filter into the tank and close
it with the cap.
 STEP 3:
Adjust the suction volume of the de-
tergent solution by means of the dos-
age regulator for detergents.
 STEP 4:
Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
 STEP 5:
To rinse, move the VPS out of "Mix"
position and pull trigger to operate
unit.
 STEP 6:
Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
 STEP 1:
Release trigger and engage gun
safety lock.
 STEP 2:
Turn pressure washer to OFF (0) po-
sition.
TAKING A BREAK ... five
minutes or more