Operating instructions

- 3
1 Lock for fresh water reservoir
2 Switch for brush drive
3 Switch for detergent solution
4 Hose for detergent solution
5 Lint sieve (suction)
6 Lock of pushing handle
7 Release button for the transport
wheel
8 Bearing wheel
9 Push handle
10 Strain relief clamp
11 Support of the transport wheel
12 Clip
13 Fresh water tank
14 waste water tank
15 Push-button for vacuum bar
change
16 Float
17 Button for brush change
18 Chassis
19 Vacuum bar
20 Brushing rollers
21 Rotating handle for brush contact
pressure
22 Pedal to lower vacuum bar
23 Mains plug
24 Carrying handle for waste water
tank
25 Fresh water tank cover
 Slide the upper slider half onto the
lower slider half.
몇 WARNING
Risk of damage. Do not pinch the cable
during the installation.
 Align the borings (2 possible height
adjustments).
 Connect the slider halves to the
lock screws, discs and star grips.
 Fasten the cable to the slider using
clips.
 Insert the transport wheel axles into
the borings on the appliance and
lock them.
The brushes must be installed before
the initial operation (see "Maintenance
works").
Operating elements
24
25
Before Commissioning
Installing the pushing handle
Installing the transport wheels
Installing the Brushes
5EN