SC 3 EasyFix English Español Français 2 22 43 59687540 2019.
Contents STEAM CLEANER OPERATOR`S MANUAL IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS.......... Description of the unit ......................... Initial commissioning........................... Installation........................................... Operation ............................................ Important application instructions ....... Use of accessories.............................. Care and service................................. Troubleshooting guide.........................
STEAM CLEANER OPERATOR`S MANUAL Store the device in a suitable locaIMPORTANT tion after use to avoid tripping acciSAFETY dents. Do not expose to rain. INSTRUCTIONS Repairs are only to be carried out by Observe all basic precautions when using the device, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE This device is exclusively intended for private household use.
Never insert objects into the device openings. Do not use the device if the device openings are blocked. Never fill solvents, solvent-containing liquids or undiluted acids (e.g. detergents, petrol, paint thinner, and acetone) into the water reservoir as these substances corrode the materials used in the device. Never immerse the device in water or other liquids. Only use the device in containers / pools that are not filled with water or other liquids.
GROUNDING INSTRUCTIONS This device must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This device is equipped with a cord having an equipment grounding conductor and ground plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Safety devices Symbols on the device 몇 CAUTION (according to type of the device) Risk of burns, surface of device becomes hot during operation Risk of scalding from steam Missing or modified safety devices Safety devices are provided for your own protection. Never modify or bypass safety devices. Pressure regulator In the case of excessively high pressure in the event of a fault, a safety valve relieves the pressure into the atmosphere. Fuse The fuse prevents the device from overheating.
ture reference the manufacturer`s instructions. Technical data Scope of delivery The scope of delivery for the appliance is shown on the packaging. During unpacking, check the contents for completeness. If any accessories are missing or in the event of any shipping damage, please contact our Customer Care Group by calling 1-800-537-4129. Select the prompts for warranty services.
Description of the unit 8 English
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Decalcification cartridge Filling hole for water Carrying handle Holder for accessories Display Indicator light (green) - mains voltage present Indicator light (red) - water shortage Indicator light (red) - replace decalcification cartridge RESET button - set water hardness Switch - On Switch - Off Park bracket for floor nozzle Mains connection cable with mains plug Non-driven wheels (2 x) Steering roller Steam gun Steam lever Un
Installation 3. Push the open end of the accessory onto the spotlight nozzle. Installing accessories 1. Insert and engage the steering roller and non-driven wheels. 2. Push the open end of the accessory onto the steam gun so that the unlocking button on the steam gun engages. 10 4. Connect extension tubes with the steam gun. a Push the 1st extension tube onto the steam gun until the unlocking button on the steam gun engages. The connection pipe is connected.
5. Push the accessory and / or the floor nozzle onto the free end of the extension tube. Operation Filling with water The water reservoir can be filled at any time. ATTENTION Damage to the device Unsuitable water can block the nozzles or damage the water level indicator. Do not use condensation from the clothes dryer for filling. Do not use collected rain water for filling. Do not use detergents or other additives (e.g. scents) for filling. 1. Fill the water reservoir with a maximum of 1 l of tap water.
Note When steaming for the first time after removing and reinserting the decalcification cartridge, the steam jet may be weak or irregular, and individual drops of water may be expelled. The device requires a short running-in period during which the decalcification cartridge fills with water. The steam volume that is expelled increases constantly until the maximum steam volume has been reached after approx. 60 seconds. 1. Place the device on a solid surface. 2. Plug the mains plug into a socket.
switches off and the red water shortage indicator light flashes. To be able to operate the device again, the device has to be switched off and back on again. In the process, you must make sure that the cartridge has been inserted correctly and there is enough water in the water reservoir. 1. Fill the water reservoir with a maximum of 1 l of tap water through the cover of the decalcification cartridge. The red water shortage indicator light goes out. 2. Press the steam lever until no more steam flows out.
Important application instructions Keep the device safe 1. Plug the extension tubes into the large holders for accessories. 2. Plug a manual nozzle and spotlight nozzle into each extension tube. 3. Fasten the large round brush to the spotlight nozzle. 4. Plug the small round brush and nozzles into the medium-sized holder for accessories. 5. Hang the floor nozzle in the park bracket. Cleaning the floor areas We recommend sweeping the floor or vacuum cleaning it before using the device.
Glass cleaner ATTENTION Glass breakages and damaged surfaces Steam can damage sealed points of the window frame and, at low exterior temperatures, lead to tension on the surface of window panes and hence to glass breakages. Do not direct the steam at sealed points on the window frame. At low exterior temperatures, heat up the window panes by gently steaming the whole glass surface. Clean the window area with a manual nozzle and cover. To remove the water, use a squeegee or wipe the surfaces dry.
Manual nozzle The manual nozzle is used for cleaning small areas that can be washed down, shower cubicles and mirrors. 1. Push the manual nozzle onto the steam gun according to the spotlight nozzle. to streaks during steam cleaning, which will disappear however once these have been used several times. We recommend sweeping the floor or vacuum cleaning it before using the device. In this way the floor will be cleared of dirt and loose particles before the wet cleaning commences.
3. Attach floor cleaning cloth to floor nozzle. a Place the floor cleaning cloth with the hook and loop fastener pointing upwards on the floor. b Place the floor nozzle onto the floor cleaning cloth, applying slight pressure. Removing the floor cleaning cloth 1. Place one foot on the bottom corner of the floor cleaning cloth and lift the floor nozzle up. Note Initially, the floor cleaning cloth's hook and loop fastener strip is very strong and cannot be removed from the floor nozzle easily.
Note Care and service Draining the water reservoir ATTENTION Device damage due to water putrefaction If the device is not put into operation for more than 2 months, the water in the tank may putrefy. Drain the water reservoir before breaks in operation. 1. Press the OFF switch. The device is switched off. 2. Pull the mains plug out of the outlet. 3. Remove the accessory/accessories from the accessory holders. 4. Remove the decalcification cartridge from the device. 5. Drain the water reservoir.
1. Press the OFF switch. The device is switched off. 2. Remove the decalcification cartridge. 3. Insert the new decalcification cartridge. 4. Press the On switch. The device is switched on. 5. Press and hold the RESET button for 4 seconds. The "replace decalcification cartridge" indicator light goes out and the run time for the decalcification cartridge starts again. 6. Allow the device to heat up. 7. Press and hold the steam lever for approximately 60 seconds to vent the decalcification cartridge.
otherwise be set automatically to the last selected water hardness or the highest water hardness set during initial start-up. 1. Connect the mains plug. 2. Make sure that the device is switched off. 3. Press the RESET button and hold it while switching on the device. Care of accessories (Accessories - depending on scope of delivery) Note The microfiber cloths are not suitable for dryer. Note When washing the cloths, observe the notes on the washing tag.
Troubleshooting guide Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorized Customer Service. 몇 WARNING Risk of electric shock and burns Trying to eliminate faults while the device is connected to the mains or has not yet cooled down is always dangerous. Remove the mains plug. Allow the device to cool down.
