Operating instructions

- 9
The nozzle size is marked on the key sur-
face of the nozzle.
o = possible
x = installed as part of the series
Materials list
Item: Description Order No. Material Quantity touching
media
1 Protective part 4.394-009 (5.000-506) sheet metal 1.4301, (5.114-
077) ring 1.4541
1X
2 Protective part 4.394-011 1.4301 1 X
3 Circular blank 5.005-174 1.4541 3 X
4 Casing 5.060-085 1.4305 1 X
5 Casing 5.060-114 1.4305 1 X
6 Shaft 5.100-043 1.4305 1 X
7 Shaft 5.100-044 1.4305 1 X
8 Disc 5.115-122 Teflon bronze 2 X
9 Flange 5.122-059 1.4305 2 X
10 Flange 5.122-068 1.4305 1 X
11 Pin 5.314-037 1.4541 2 X
12 Bevel wheel 5.354-003 1.4305 1 X
13 Bevel wheel 5.354-004 1.4305 1 X
14 Coupling unit 5.471-031 1.4305 1 X
15 Ring 5.570-039 CuSn8F55 4 X
16 Cylinder screw M5x12 6.304-011 1.4571 20 X
17 Cylinder screw M5x16 6.304-012 1.4571 10 X
18 Cylinder screw M8x16 6.304-013 1.4571 1 X
19 Cylinder screw M5x30 6.304-112 A4-70 1
20 Safety disc 8,4 6.343-125 Nirosta X7 1 X
21 O-Ring 23.47x2.62 6.362-219 EPDM 1 X
22 O-Ring 18x2.5 6.362-431 FPM 1 X
23 O-Ring 17.96x2.62 6.363-154 FPM 1 X
24 Grooved ring D26xD38 6.365-423 PTFE 4 X
25 Hex screw M8x16 7.304-538 A4-70 1 X
26 Hex nut M5 7.311-203 A4-70 2 X
27 Domed cap nut M5 7.311-385 A1-50 4 X
28 Seal ring 22 7.362-011 Cu 1 X
29 Screwed sealing plug 7.382-251 1.4571 1 X
30 Shaft, complete 4.100-229 (5.100-492) shaft 1.4305, screwed sealing
plug 1.4571
1X
Selecting the nozzle
Flow volume [l/h] Pressure [MPa] Number of nozzles Nozzle size [mm] Order No. HKF 200 E HKF 200 ET
3000 5 4 1,8 4.765-007 o --
3000 5 2 2,4 5.765-007 x --
3000 6 4 1,65 5.765-082 o --
3000 5 2 2,7 4.765-006 x --
3000 5 1 3,8 4.765-008 o --
3000 8 2 2,5 5.765-018 o --
3800 5 2 2,9 5.765-025 o --
3800 8 2 2,7 4.765-006 x --
6000 5 2 3,8 4.765-008 o --
6000 8 2 3,5 5.768-075 o --
6000 8 1 5,0 on request o --
3800 8 2 2,7 6.415-862 -- x
24 EN