Safety data sheet

Page 5/11
Safety Data Sheet
according to WHS Regulations
Printing date 13.08.2021 Revision: 09.08.2021Version number 7
Trade name:
VehiclePro Spray Wax RM 821 Classic
(Contd. of page 4)
53.1.21
0.4 mg/l (STP)
PNEC sediment 12.27 mg/kg (freshwater)
13.09 mg/kg (marine water)
PNEC soil 7 mg/kg (soil)
·
Exposure controls
·
Personal protective equipment
·
General protective and hygienic measures
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
·
Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
Not necessary if room is well-ventilated.
·
Protection of hands:
* chemical resistant protective gloves (EN 374)
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Protective gloves.
·
Material of gloves
Butyl rubber, BR
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
For the permanent contact gloves made of the following materials are suitable:
* butyl rubber 0,7 mm, 480 min (EN 374)
·
As protection from splashes gloves made of the following materials are suitable:
* nitril rubber 0,4 mm, 30 min (EN 374)
·
Eye protection:
Goggles recommended during refilling.
9 Physical and Chemical Properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Fluid
Colour:
Blue
·
Odour:
fresh
·
Odour threshold:
Not determined.
·
pH-value at 20 °C:
4
·
pH-value 1 %:
6-8
(Contd. on page 6)
AU