Safety data sheet

Page 5/12
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 12.02.2021 Revision: 28.04.2020Version number 7
Trade name:
VehiclePro High-Pressure Wash CP 935
(Contd. of page 4)
52.0.1.1
·
8.2 Exposure controls
·
Appropriate engineering controls
No further data; see item 7.
·
Individual protection measures, such as personal protective equipment
·
General protective and hygienic measures
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Do not inhale gases / fumes / aerosols.
Avoid contact with the eyes and skin.
·
Respiratory protection:
Filter A/P2.
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure
use self-contained respiratory protective device.
Not necessary if room is well-ventilated.
·
Hand protection
* chemical resistant protective gloves (EN 374)
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Protective gloves.
·
Material of gloves
Butyl rubber, BR
·
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
·
For the permanent contact gloves made of the following materials are suitable:
* butyl rubber 0,7 mm, 480 min (EN 374)
·
As protection from splashes gloves made of the following materials are suitable:
* nitril rubber 0,4 mm, 30 min (EN 374)
·
Not suitable are gloves made of the following materials:
Strong material gloves
Leather gloves
·
Eye/face protection
Tightly sealed goggles (EN 166)
·
Body protection:
Protective work clothing.
GB
(Contd. on page 6)