Instructions

EN | 29
EN
ashing. Select the current hour using the buttons ▲ / ▼.
2. Press the CLOCK button again. The minute starts ashing. Select the current minute using the
buttons ▲ / ▼.
3. To select between 24h or 12h format, press the button during the time setting.
4. Press the CLOCK button again. The time is now set and will be displayed.
5. To show the time while in any playback mode, press the CLOCK button once.
Alarm
An alarm can only be set while the unit is in standby mode.
For the alarm to function properly, the time must be set rst.
1. While the unit is in standby mode, press and hold for 2 seconds the TIMER button on the remote
control. The hour will start ashing. Set the desired hour using the buttons ▲ / ▼.
2. Press the TIMER button again. The minutes will start ashing. Set the desired minutes using the
buttons ▲ / ▼.
3. Press the TIMER button again. The alarm mode will be ashing. Select the desired mode
(BUZZER, DISC, USB, DAB, FM) using the buttons ▲ / ▼.
4. Press the TIMER button again. The alarm volume will start ashing. Set the desired volume using
the buttons ▲ / ▼.
5. Press the TIMER button again to conrm your settings. The alarm is now set and will sound at
the set time. will be shown in the display.
Activating/Deactivating an Alarm
• When pressing the TIMER button once while in standby mode, the display will show the currently
set alarm details. Press the TIMER button again until disappears from the display. The alarm is
now deactivated. Follow the same procedure to activate the alarm again.
Stopping an Active Alarm
• When the alarm is sounding, press the POWER button to turn it off. The alarm will come on
again on the next day at the set time.
DAB+ Radio
1. Switch the unit on as described previously.
2. Select the DAB mode by pressing the
 










SOURCE button on the unit or the DAB/FM button on
the remote control repeatedly until the display shows “DAB”.
When the unit is switched into DAB mode for the rst time, it will automatically tune for available
stations.
Alternatively: Press the / MENU button to enter the DAB menu. [FULL SCAN] is shown in the
display. Press the PLAY/PAUSE button to start the scan.
Or press the INTRO/SCAN button to automatically scan for radio stations.
Running a full scan will clear all stations previously found.
3. Once the scan is completed the radio will play the rst station in the station list.
4. Select a desired radio station by pressing the / buttons.
Manually Store Radio Stations
This unit enables you to store up to 20 radio stations:
1. Tune to a radio station which you would like to store.
2. Press and hold for 2 seconds the PROG button.
3. Select a desired preset (1 - 20) on which you want to store the current station by pressing the
or button.
4. Press the PROG button to conrm your setting. STORED will be shown in the display.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, press the ▲ / ▼ buttons until you reach the desired preset. Alterna-
tively you can use the number buttons to select the desired preset.