Instructions

30 | EN
DAB+ Menu
Press the / MENU button while in DAB+ mode to enter the DAB+ menu. Inside the menu you can
select between the following menu items and functions by pressing the / buttons (to enter menu
items and to conrm a selection, press the PLAY/PAUSE button; to exit menu items and the menu
press the / MENU button):
Menu Item Function
Full Scan Full scan for all available radio stations.
Manual Manually tune to a specic channel/frequency.
DRC This function reduces the difference between the loudest and quietest audio being
broadcast. Effectively, this makes quiet sounds comparatively louder, and loud
sounds comparatively quieter.
Note: DRC only works if it is enabled by the broadcaster for a specic station.
System View software version and reset the unit.
Info Display
To display information (if broadcast by station) repeatedly press the INFO button on the remote con-
trol.
FM Radio
1. Switch the unit on as described previously.
2. Select the FM mode by pressing the
 










SOURCE button on the unit or the DAB/FM button on
the remote control repeatedly until the display shows “FM”.
3. Select a desired radio station by pressing the or button repeatedly.
4. To automatically search for the next available radio station, press and hold for 2 seconds the
or button.
Manually Store Radio Stations
This unit enables you to store up to 20 radio stations:
1. Tune to a radio station which you would like to store.
2. Press the PROG button. The display will show the program number ashing and “EMPTY”.
3. Select a desired preset (1 - 20) on which you want to store the current frequency by pressing the
▲ or ▼ button.
4. Press the PROG button once again to conrm your setting. “STORED” will be shown in the
display.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, press the ▲ or ▼ button until you reach the desired preset or the
number button.
Automatically Store Radio Stations
Rather than manually storing stations, you can also let the unit automatically store found stations:
1. While in radio mode press the INTRO/SCAN button.
2. The unit will consecutively store found stations (up to 20 stations).
Once nished, the unit will play the station which was rst available.
3. To recall a stored frequency, press the ▲ or ▼ button until you reach the desired preset or the
number button.
FM Menu
Press the / MENU button while in FM mode to enter the FM menu. Inside the menu you can select
between the following menu items and functions by pressing the / buttons (to enter menu items
and to conrm a selection, press the PLAY/PAUSE button; to exit menu items and the menu press
the / MENU button):