Instructions

EN
EN | 25
System Settings Menu
 To enter the System Settings press and hold for 2 seconds the MENU button while in
TUNING-TUNING+ buttons or the
CONTROL KNOB and press OK.
 .
Inside the System Settings menu there are the following options:
Theme Change the background color and overall appearance of the display.
Night Mode 󰀨
setting for optimized appearance in darkness).
Egg Timer Set an egg timer using the CONTROL KNOB. To add 10 seconds to
the timer, press the +10 Sec button. To exit the egg timer setting without
setting a timer, press the TIMER RESET button.
Sleep The sleep function enables you to set a timer after which the unit will turn
itself into standby mode automatically. Select the desired time under this
menu option.
Alarm Enter to set the alarm(s).
Alarm: Set the selected alarm ON or OFF.
Frequency: Select between Daily/Once/Weekends/Weekdays.
Wake Up Time: Set the desired alarm time.
Source: Select between Buzzer, Digital Radio or FM for wake up source.
Duration: Set the desired duration of the alarm.
Alarm Volume: Set the desired alarm volume.
Press BACK to save the alarm setting. The display will show a clock
icon.
󰀨ON/OFF
button.
Snooze: When you press any button (except ON/OFF ) during an
active alarm, it will activate the snooze function. Rotate the CONTROL
KNOB to select a snooze duration (5, 10, 15, or 30 minutes) after which
the alarm will sound again.
To cancel the snooze function and stop the alarm, press ON/OFF .
Time/Date 
default. If you wish to set time and date manually, however, you can do
so under this menu option.
Set Time/Date: Manually set time and date.
Auto Update: Select whether time/date should be set automatically from

Set 12/24 Hour: Select between 12 hour or 24 hour display mode.
Set Date Format: Select your preferred date format.
Clock Style: Select the style of the clock display while the unit is in
standby mode.
Backlight Set the display backlight brightness (High / Medium / Low) in ON mode
and
set the duration of timeout (time after which the display backlight will
automatically dim its brightness to a level as set under “Dim Level”).
Language Change the OSD menu language.