Operating instructions

English 9
몇 CAUTION ● Do not use the
appliance if it has been dropped
beforehand, is visibly damaged
or if it is leaking. ● Only operate
or store the device in accord-
ance with the description or fig-
ure. ● Accidents or damage due
to the device falling over. Before
all actions with or on the device,
you must make sure that it is sta-
ble. ● Never leave the device
unsupervised while it is in oper-
ation.
ATTENTION ● Device damage.
Never fill the water reservoir with
solvents, liquids containing sol-
vents or undiluted acids (e.g. de-
tergents, petrol, paint thinners
and acetone). ● Only switch on
the device when the fresh water
tank and waste water tank are
installed. ● Do not pick up sharp
or larger objects with the device,
such as e.g. glass shards, grav-
el or toy parts. ● Do not fill the
fresh water container with vine-
gar, decalcification agents, es-
sential oils or similar
substances. Avoid taking up
these substances with the de-
vice. ● Use the device only on
hard floors with a watertight
coating, such as e.g. varnished
parquet, enamelled tiles or lino-
leum. ● Do not use the device
for cleaning carpets or carpeted
floors. ● Do not guide the device
over the floor grilles of convec-
tion heating systems. The de-
vice cannot vacuum up the
escaping water when it is guided
over a floor grille. ● In case of
longer breaks in operation and
after use, switch off the device at
the main switch / device switch
and pull out the charged mains
plug. ● Do not operate the de-
vice at temperatures below
0 °C. ● Protect the device from
rain. Do not store the device out-
doors.
Symbols on the maschine
 Symbols for device cleaning mode after finishing
work are:
– engraved in the bowl of the cleaning station,
– as a sticker on the back of the fresh water tank.
 Symbols for unlocking the dirty water tank / parking
station are located:
– as a sticker on the unlocking button for waste wa-
ter tank / parking station.
The application and description of the symbols (see
chapter Floor head cleaning by a rinsing process).
Description of the device
The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the illustrations, refer to the graphics page.
Illustration A
1 ON/OFF switch
2 Boost function button
Increased roller speed and additional water quantity
for stubborn dirt
3 Button for adjusting the cleaning level
Switching between cleaning level 1 and 2
4 "Cleaning level 2" indicator
Increased roller speed and amount of water
5 "Cleaning level 1" indicator
Normal roller speed and amount of water
6 "MAX" indicator (red)
The waste water tank is full
7 "MIN" indicator (blue)
The fresh water tank is empty
 Warning not to keep the device un-
der water is:
– on the underside of the floor
head.