High pressure cleaner Electric motor - Cold water Register your product www.kaercher.com/welcome English..... 3 LIS T E D ® 9.800-340.
MODELS: 1.107-084.0 HD 5.0/50 Eb Cage 1.107-087.0 HD 5.
CONTENTS Important Safety Information.................................................................3-4 Component Identification.......................................................................... 5 Assembly Instructions............................................................................... 6 Operating Instructions.............................................................................. 7 Applying Detergent & General Washing Techniques................................
Thank you for purchasing this Pressure Washer. We reserve the right to make changes at any time without incurring any obligation. Owner/User Responsibility: The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer. Warning information should be emphasized and understood.
PRESSURE WASHER OPERATOR’S MANUAL IMPORTANT SAFETY INFORMATION WARNING WARNING: Grip cleaning wand securely with both hands before starting. Failure to do this could result in injury from a whipping wand. TRIGGER GUN KICKS BACK - HOLD WITH BOTH HANDS 14. Inlet water must be clean fresh water and no hotter then 90°F. 15. Manufacturer will not be liable for any changes made to our standard machines or any components not purchased from us. 16.
Optional Hose Reel & Mount Wand Electrical Box Spray Gun High Pressure Hose Pump High Pressure Nozzles (Nozzles Brass (Black) and Red sold separately) PRESSURE WASHER OPERATOR’S MANUAL COMPONENT IDENTIFICATION Rupture Disk Unloader Valve Pump Protector High Pressure Outlet Cold Water Inlet Power Cord Pump — Delivers a specific gpm to the high pressure nozzle which develops pressure. Rupture Disk — Secondary pressure release in the unlikely event the unloader valve fails.
PRESSURE WASHER OPERATOR’S MANUAL ASSEMBLY INSTRUCTIONS Spray Gun High Pressure Outlet Coupler Collar Safety Latch High Pressure Hose High Pressure Hose STEP 1: Attach the high pressure hose to the spray gun using teflon tape on hose threads. STEP 2: Before installing nozzle, turn on water supply and run machine allowing water to flush through the system until clear. Cold Water Source Garden Hose Pump Water Inlet STEP 4: Connect the garden hose to pump water inlet. Inspect inlets.
ING RN WA STEP 1: Connect machine to adequate power source. Push reset button on GFCI if equipped. STEP 2: Trigger the spray gun to eliminate trapped air then wait for a steady flow of water to emerge from the spray wand. Then install nozzle. NOZZLES Safety Latch WARNING! Never replace nozzles without engaging the safety latch on the spray gun trigger. STEP 3: Turn machine on.
PRESSURE WASHER OPERATOR’S MANUAL APPLYING DETERGENT & GENERAL OPERATING TECHNIQUES WARNING: Some detergents WARNING may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning. The harmful elements may cause property damage or severe injury. STEP 1: Connect detergent injector to high pressure outlet on machine, Connect high pressure hose to injector with quick coupler. (Check to make sure locking coupler sleeves are in proper position before applying water pressure.
On-Off Switch STEP 1: Remove detergent suction tube from container and insert into one gallon of fresh water. For low pressure connect the black detergent nozzle. Pull trigger on spray gun and siphon water for one minute. STEP 2: Turn off the motor. High Pressure Outlet Water Inlet STEP 4: Disconnect the garden hose from the water inlet on the machine. STEP 5: Disconnect the high pressure hose from high pressure outlet. STEP 3: Press trigger to release water pressure.
PRESSURE WASHER Troubleshooting Guide TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION PUMP RUNNING NORMALLY BUT PRESSURE LOW ON INSTALLATION Pump sucking air Check water supply and possibility of air seepage. Check valves sticking Check and clean or replace if necessary. Unloader valve seat faulty Check and replace if necessary. Nozzle incorrectly sized Check and replace if necessary. Worn piston packing Check and replace if necessary. Valves worn Check and replace if necessary.
This pressure washer was produced with the best available materials and quality craftsmanship. However, you as the owner have certain responsibilities for the correct care of the equipment. Attention to regular preventative maintenance procedures will assist in preserving the performance of your equipment. Contact your dealer for maintenance. Regular preventative maintenance will add many hours to the life of your pressure washer. Perform maintenance more often under severe conditions.
PRESSURE WASHER HOSE & SPRAY GUN ASSEMBLY 10 OPERATOR’S MANUAL 1 3 2 9 6 6 7 4 8 5 9.800-415.0-4 HOSE & SPRAY GUN ASSEMBLY PARTS LIST ITEM PART NO. 1 9.802-228.0 2 8.918-088.0 PART NO. DESCRIPTION QTY Gun w/Wand (5000 PSI), w/Coupler 1 4 9.802-251.0 Hose, 1/4" x 1/2" Clear Vinyl 6 ft. Hose, 3/8" x 50', 2W, TS,SOSW,HIGH PRESS CP (MPE, BDE,BRE and HD) 1 5 9.802-160.0 Strainer, Plastic, 1/4" Hose Barb 1 6 9.802-167.
THANK YOU! ! MERCI! DANKE! GRACIAS! vielen Vorteilen. advantages. avantages. Registre su producto y aproveche de muchas ventajas. www.kaercher.com/welcome Bewerten Sie Ihr Produkt und sagen Sie uns Ihre Meinung. Rate your product and tell us your opinion. Évaluer votre produit et dites-nous votre opinion. Reseñe su producto y díganos su opinión. www.kaercher.com/dealersearch Alfred Kärcher SE & Co. KG Alfred-Kärcher-Str. 28-40 71364 Winnenden (Germany) Tel.
