Manual

– 10
– Temperature limiter has got triggered
again.
 Get the device checked by Customer
Service.
– Fuel tank empty
 Refill.
– Water shortage
 Check water supply, check connec-
tions, clean water shortage safeguard.
– Fuel pump is defective
 Replace fuel pump (Customer Service).
– Fuel filter dirty
 Change fuel filter.
– No ignition spark
 If device is in use and no ignition spark
can be seen through the viewing glass,
have device checked by customer ser-
vice.
– Uneven spraying of fuel at the burner
nozzle
 Clean fuel filter.
– Water inlet is closed.
 Open the water supply.
– Amount of water supply is too low.
 Increase water flow quantity.
– Sieve blocked in the water shortage
safe guard.
 Clean sieve in the water shortage safe
guard.
– Valves in the high pressure pump are
leaky or dirty.
 Inform Customer Service.
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Burner does not start
Water scarcity safeguard does not
switch on - no flame
Customer Service
Warranty
Accessories and Spare Parts
24 EN