Operation Manual

9
Switching off
• Release the lever.
During breaks in work and when leaving
the unit secure it against inadvertent swit-
ching on by pressing the safety ratchet.
Regulate operating pressure
High operating pressure:
twist spray lance in direction “ ”.
Low operating pressure:
twist spray lance in direction “ ”.
Adding the cleaning agent
• Draw the cleaning agent suction hose out
of the housing to the required length.
• Hang the cleaning agent suction hose in
the cleaning agent container.
• Twist spray lance to low operating pres-
sure “ ”.
No detergent in high-pressure mode
If cleaning agent has been added:
• Hang the cleaning agent suction hose in
a container of clear water, switch on the
unit for about one minute and flush throu-
gh.
Recommended cleaning method
1. Spray the cleaning agent on the dry
surface sparingly and let it react (but not
dry out).
2. Wash off the loosened dirt with the high-
pressure jet.
Connect accessories
The following accessories are included in
the scope of delivery.
Wash brush
for large, smooth surfaces – e.g. on the
automobile, caravan or boat. Cleaning agent
can be added.
Rotary nozzle
for stubborn accumulations of grime – e.g.
moss-covered promenade tiles or facades.
Work without cleaning agent and with the
highest operating pressure.
Finishing operations
• Master switch to “0”.
• Draw out power plug.
Water supplied from the water main
• Close the water supply tap.
• Separate the unit from the water connec-
tion.
Water supplied from an open container
• Unscrew the suction hose with filter at the
water inlet of the unit.
• Pull the lever on the handgun until the unit
is without pressure.
• Press in the safety ratchet to protect the
unit against inadvertent switching on.
Safekeeping
Caution! Frost can destroy an incomple-
tely emptied unit. In the winter keep the unit
in a frost-free room.
• Separate the spray lance from the hand-
gun.
• Wind up the power cord and, for example,
hang it around the handgun.
Transportation
• Switch off the unit before transporting it.
• To transport it over stairs or obstacles lift
the unit at the transportation handle.
• To transport the unit over even surfaces
draw it by the drawing bar.