② ⑲ ⑩ ④ ㉓ ⑩ ① ⑤ ㉑ ⑧ ⑱ ㉒ ㉓ ⑨ ⑥ ⑦ ⑰ ③ B 42PCS G 3.5*25 10PCS C C1-1 C2-1 C1-2 C2-2 H 3.5*35 8PCS 5*10 8PCS J K 3PCS ⑯ ⑬ 4PCS I ⑬ ⑯ ⑫ ⑰ D 36PCS ⑭ ⑮ ⑳ A ⑭ ⑮ 8*60 4PCS ⑪ E 5PCS F 8PCS 3.
1 2 900*334 1PC 7 900*334 1PC 8 220*334 1PC 9 16 15 520*120 2PC 17 284*60 2PC 434*334 1PC 10 220*314 1PC 220*334 1PC 4 3 11 164*334 2PC 18 530*294 2PC 434*334 1PC 598*248 1PC 900*80 1PC 13 598*248 1PC 20 370*80 1PC 6 1200*334 1PC 12 19 900*80 1PC 5 1200*334 1PC 14 300*120 2PC 21 370*80 1PC 300*120 2PC 22 23 1177*230 1PC 330*282 2PC
STEP 1 1.Find board 6 and install fittings A and B. 2.Then install board 7,8 and 9.
STEP 2 1.On the basis of step 1,C1-1 is installed on board 8 and 9 with fittings F. 2.C1-2 is installed on board 7 and 9 with fittings F.
STEP 3 On the basis of step 2,Installation board 22, insert into groove. ⑧ ㉒ ⑨ ⑥ ⑦ STEP 4 1.On the basis of step 3,Find board 5 and install fittings A and B. 2.Then install it on board 7 ,8 and 9.
STEP 5 On the basis of step 4,Install Fittings D with Fittings G, on the back of board 6 G G D D G G D G D ⑥ D ⑦ D*5 G*10 STEP 6 1.On the basis of step 5,Find board 10 and install fittings A and B. 2.Then install board 5.
STEP 7 1.Find NO.1 and NO.2 boards,install with fittings K. 2.Install fittings J with F. F J ② K ① ② ① F*8 J*3 K*2 STEP 8 On the basis of step 7.Find NO.3 and NO.4 boards,install fittings A and B.
STEP 9 1.On the basis of step 6.7 and 8.Install fittings A and B. 2.Install fittings E with I on the board 3,4,7,8。 E ② B A I ④ E I ⑩ ① B A ⑧ ⑤ ⑩ ⑨ E ③ I ⑦ E ⑥ I A*4 B*4 E*8 I*8 STEP 10 1.Find NO.18 and NO.19 boards,install with fittings K. 2.Install fittings J with F. 3..Find NO.20 and NO.21 boards,install with fittings B.
STEP 11 On the basis of step 9 and 10.Install fittings A and B. ② ⑲ ④ ㉑ ① ⑱ ⑨ ③A B ⑳ A*10 B*6 STEP 12 1.Install board 13，14，15 with fittings H.Then Installation board 17, insert into groove. 2.Then install board 11,12 ,16 with Fittings A and B. 3.Install C2-1,C2-2 with fittings F on the drawer's back.
STEP 13 1.On the basis of step 12,Install the drawer. 2.Find two pieces of glass and install them. 3.Then take out the LED lamp and fix it behind the glass. LED ㉓ ⑲ LED ㉓ ㉑ ㉓ ⑫ ⑱ ⑪ ㉓ ⑳ Note: No. 11,12 ,18,19,20 and 21 board with protective film.
