MSDS

ManualsBrandsKarnak ManualsBuilding materials1-gal. Asphalt Flashing Cement

Page: 1 of 5

Material Safety Data Sheet

24 HR. CHEMTREC EMERGENCY #: 1-800-424-9300

(OUTSIDE THE U.S. & CANADA: 1-202-483-7616)

HAZARD RATING

4 - EXTREME

3 - HIGH

2 - MODERATE

1 - SLIGHT

0 - INSIGNIFICANT

Health

Fire

Special

Reactivity

SECTION 1 - PRODUCT IDENTIFICATION

IDENTITY: Asphalt Cements / Coatings – AF MANUFACTURER:

19AF Karnak Corporation

330 Central Ave.

Clark, NJ 07066 U.S.A.

DATE: 4/16/2009

Revision: 6 Telephone #: 1-732-388-0300

24 HR CHEMTREC EMERGENCY NUMBER 1-800-424-9300

(OUTSIDE THE U.S AND CANADA 1-202-483-7616)

SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS

Other Limits

Components CAS# Weight % OSHA PEL ACGIH TLV Recommended

Asphalt 8052-42-4 30-80 N.E. 5mg/m

5mg/m

(NIOSH)

Aliphatic hydrocarbons 8052-41-3 3-40 100 ppm 100 ppm 350mg/m

(NIOSH)

Amorphous Alumina Silicates 93763-70-3 0-20 15mg/m

10mg/m

N/A

Attapulgite Clay 12174-11-7 0-20 N/A 5mg/m

N/A

Cellulose Fibers 9004-34-6 0-15 5mg/m

5mg/m

N/A

Polymers 9003-55-8 0-20 N/A N/A N/A

Cationic Salt 28701-67-9 0-3 N/A N/A N/A

PEL = Permissible Exposure Limits OSHA = Occupational Safety and Health Administration

TLV = Threshold Limit Value ACGIH = American Conference of Governmental Industrial Hygienists

N.E. = Not Established NIOSH = National Institute for Occupational Safety and Health

N.A. = Not Applicable

Summary of content (5 pages)

PAGE 1
Page: 1 of 5 Material Safety Data Sheet 24 HR. CHEMTREC EMERGENCY #: 1-800-424-9300 (OUTSIDE THE U.S. & CANADA: 1-202-483-7616) HAZARD RATING 4 - EXTREME 3 - HIGH 2 - MODERATE 1 - SLIGHT 0 - INSIGNIFICANT Fire Health 2 2 0 Reactivity Special SECTION 1 - PRODUCT IDENTIFICATION IDENTITY: Asphalt Cements / Coatings – AF MANUFACTURER: 19AF Karnak Corporation 330 Central Ave. Clark, NJ 07066 U.S.A.
PAGE 2
MSDS Page 2 of 5 Rev.6 Asphalt cements and coatings-AF SECTION 3 - HAZARDS IDENTIFICATION Combustible liquid and Vapor Potential Health Effects: Fumes from product can be unpleasant, may cause nausea, headache and irritating to eyes, skin, and respiratory tract. SECTION 4 - FIRST AID MEASURES Eye Contact: If this product comes in contact with eyes, Flush eye with plenty of water for at least 15 minutes and seek medical attention.
PAGE 3
MSDS Page 3 of 5 Rev. 6 Asphalt cements and coatings-AF SECTION 6 - ACCIDENTAL RELEASE MEASURES Eliminate sources of ignition, and ventilate the area. Add sand or earth or absorb spill with suitable absorbent material and place in a closed container. Keep product out of sewers and waterways by diking or impounding. Advise authorities if product has entered or may enter sewers or waterways. Assure conformity with applicable governmental regulations.
PAGE 4
MSDS Page 4 of 5 Rev.6 Asphalt Cement and coatings-AF SECTION 10 - STABILITY AND REACTIVITY Stability: Stable Conditions to Avoid: Keep away from heat, spark, open flames. Auto-ignition temperature unknown. Incompatibility (Materials to Avoid): May react with strong oxidizing materials. Hazardous Decomposition or Byproducts: Combustion: carbon dioxide (CO2), carbon monoxide (CO), nitrogen oxides, smoke, and fumes. Hazardous Polymerization: Will not occur.
PAGE 5
MSDS Page 5 of 5 Rev. 6 Asphalt cement and coatings-AF SECTION 14 - TRANSPORTATION INFORMATION The description shown may not apply to all shipping situations. Consult 49 CFR, or appropriate regulations, for additional description requirements.