Instructions / Assembly

330 CENTRAL AVENUE, CLARK, NJ 07066

732-388-0300 • 800-526-4236 • FAX: 732-388-9422

WEB: http://www.karnakcorp.com

Roofing

Read Material Safety Data Sheets before using this product.

FM0601

DESCRIPTION:

Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating is made of selected

asphalts and pigment flakes of pure aluminum, blended with petroleum solvents and

mineral fibers. When Karnak #27AF Fibered Perfectseal Aluminum Exterior Coat-

ing is applied to the roof, the aluminum flakes leaf to the surface, forming a reflec-

tive, metallic shield over the base material.

The advantages of this metallic aluminum shield are twofold:

A. The asphaltic oils in the base coating are protected from harmful intense rays of

the sun by the reflective properties of the aluminum. Over 50% of the sun’s rays

are reflected by this aluminum shield, thereby preventing these oils from being

“cooked” out of the base coating. The coating, therefore, retains its resilient char-

acteristics and will not prematurely crack or dry out.

B. During the hot summer months, Karnak #27AF Fibered Perfectseal Aluminum

Exterior Coating will help reduce indoor building temperatures and improve

inside living and working conditions. Karnak #27AF Fibered Perfectseal Alumi-

num Exterior Coating prevents the sun’s rays from penetrating the roof coating

and passing the heat into the building interior.

The combination of these protective materials - aluminum, asphalt and reinforcing

fibers - by the exclusive Karnak process results in a self-protecting roof coating with

longer-lasting moisture and heat resistant features. Karnak #27AF Fibered Perfect-

seal Aluminum Exterior Coating remains tenaciously bonded to the base material,

thus assuring longer roof life, with subsequent savings on roof maintenance.

SPECIFICATIONS:

ASTM D-2824 Type III

SURFACE PREPARATION:

All surfaces should be clean, dry and free of dust, dirt, oil and other foreign matter.

Repair all cracks and blisters. New asphalt roof surfaces should weather a minimum

of 90 days before being coated with Karnak #27AF Fibered Perfectseal Aluminum

Exterior Coating. However, Karnak #27AF Fibered Perfectseal Aluminum Exterior

Coating can be coated on roofs 3 to 5 days after Karnak asphalt emulsions have

been applied. Badly weathered or alligatored asphalt surfaces should be primed

with Karnak 100AF Non-Fibered Emulsion or 220AF Fibered Emulsion prior to

coating with 27AF Fibered Aluminum Coating. Allow emulsion primer to cure a

minimum of 3-5 days before application of aluminum coating.

27AF Fibered Perfectseal Aluminum Exterior Coating

PAGE 1
Roofing 27AF Fibered Perfectseal Aluminum Exterior Coating DESCRIPTION: Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating is made of selected asphalts and pigment flakes of pure aluminum, blended with petroleum solvents and mineral fibers. When Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating is applied to the roof, the aluminum flakes leaf to the surface, forming a reflective, metallic shield over the base material. The advantages of this metallic aluminum shield are twofold: A.
PAGE 2
Roofing Read Material Safety Data Sheets before using this product. 27AF Fibered Perfectseal Aluminum Exterior Coating APPLICATION: Karnak #27AF Fibered Perfectseal Aluminum Exterior Coating should be spread uniformly over the roof surface. Care should be taken not to overwork the coating during application. This could have a damaging effect on the leafing of the aluminum. Pour the correct amount of aluminum coating to cover a given area and apply uniformly.
PAGE 3
Roofing PER NRCA, (NATIONAL ROOFING CONTRACTORS ASSOCIATION) “THE CRITERIA FOR JUDGING PROPER SLOPE FOR DRAINAGE IS THAT THERE BE NO EVIDENCE OF STANDING WATER ON THE DECK 48 HOURS AFTER IT STOPS RAINING.” If further information is required, please contact Karnak’s Technical Service Department at 1-800-526-4236.