Operation Manual

30
 If cleansing agents have to be thinned, care for a good and even mixture. This
is especially adviced for powder detergents. If not mixed well, it can cause
damage to machine and hoses or spouting gun. Spray the water and soap
mixture over the surface to be cleaned, leave it a few minutes, before you wash
it off with clean water.
 Often the dirt has to be touched to remove it. Then a washing brush or rotating
brush can be a very usefull accessory.
5.3 WARNING!
• Never spray with full pressure at animals or people. However, the cleaner can
be used to clean animals like cows, horses, pigs etc. Never spray them with:
- too hot water
- too high pressure
- a nozzle with an angle of 0 degrees.
To clean animals, use a nozzle with a wide angle, to reduce the pressure per
inch. This is also the fact with cars, boats etc, which are painted with (airbrush)
drawings or have stickers on it. Spouting with too high pressure can loosen
paintings or stickers.
• Remember that water conducts electricity. Therefore never spray at electric
installations or machines, even when they are not working.
Danger of electrocution!