INSTALLATION GUIDE Hillwood Models: KKF260C Karran USA Tel: 866.452.7726 KKF260SS www.karran.com info@karran.
PARTS SHEET KKF260** 1
TECHNICAL DRAWING 2
INSTALLATION GUIDE STEP 1 1. Remove main body (1), mounting harware(5), metal wahser(4) and rubber washer(2)(3). STEP 2 2. Insert main body(1) into the hole, refix rubber(2)(3), metal washer(4) and mounting hardware(5). After adjusting the direction of main body, tighten the mounting hardware (5) with hands and tighten screws with a Philips screwdriver.
INSTALLATION GUIDE STEP 3 3. Remove mounting hardware(5), metal washer(4) and rubber washer(7) from spout kit(6). Insert the spout kit into hole, refix rubber washer(7), metal washer(4) and mounting hardware(5). After adjusting the direction of spout kit, tighten the mounting harware (5)with hands and tighten screws with a Philips screwdriver. STEP 4 4.Connect spray hose(9) with supply hose(11) and install spray head(8).Attach weight(10) to proper position of spray hose.
INSTALLATION GUIDE STEP 5 5. Connect the waterlines with outlet tightly. Turn on the outlet and check for leaks. How to operate the handle: 1) Open the handle lever to turn water on. Push to turn off. 2) Turn the handle lever to the left to increase hot water flow with higher water temperature, while lower the water temperature by operating reversely. Spray The Operation of the spray diverter: 1) When first turned on, water comes from aerator. 2) Press the botton back, water sprays from nozzles.
REPLACEMENT PARTS ** Denotes faucet component color options: C - Chrome SS - Spot Free Stainless Steel 6
