Installation Guide
4
STEP 3
STEP 4
3. Remove mounting hardware(5), metal
washer(4) and rubber washer(7) from spout
kit(6). Insert the spout kit into hole, refix
rubber washer(7), metal washer(4) and
mounting hardware(5). After adjusting the
direction of spout kit, tighten the mounting
harware (5)with hands and tighten screws
with a Philips screwdriver.
4.Connect spray hose(9) with supply hose(11)
and install spray head(8).Attach weight(10) to
proper position of spray hose.
INSTALLATION GUIDE