Installation Guide

INSTALLATION INSTRUCTIONS
 Always inspect sink closely for damage prior to installing.
 Take care when handling sinks as stainless steel sinks may have sharp edges and quartz
sinks are heavy.
 Undermount sinks should always be installed by an experienced professional.
 The sink comes with a paper template. Alternatively a DXF file can be downloaded from
www.karran.com for use with a CNC machine.
 When installing into solid surface or stone countertops, always use a quality silicone seal-
ant and undermount clips/fasteners provided with your sink. Optional DISC Clips may also
be purchased and used.
 Adhere to all local building and plumbing codes.
Installation:
1. Check the dimensions of your sink to the paper
template dimensions. Adjust your template to
adjust your reveal dimensions. Always discuss
with the client their expectations for a positive or
negative reveal.
2. Locate template in desired position on counter-
top paying attention to faucet placement and
cabinet constraints.
3. Trace the template and cut the countertop sur-
face on the inside of the line. Polish accordingly.
4. Loosely install fasteners by following the coun-
tertop manufacturers instructions. Evenly space
fasteners.
5. Apply a quality silicone to the underside of the
countertop around the perimeter of the sink cut-
out. Position and align the sink in the correct
position over the opening.
6. Tighten fasteners to secure sink.
7. Check alignment of sink to the opening.
8. Double check tightness of fasteners and remove
excess silicone. After silicone has cured, wipe
the bead with a wet rag. This will smooth out
any rough areas.
Stainless Steel & Quartz Undermount Sinks
NOTE: The paper template or DXF file downloaded from www.karran.com serve as a guide. The
actual sink should always be present prior to making the cutout. It is the responsibility of the
installer to check all dimensions prior to cutting any countertop material.
For questions please call Karran USA customer service - 866.452.7726