WR-14
1.FOREWORD.................................................................................2 2.SYSTEM FEATURES.....................................................................2 3.SYSTEM TYPE..............................................................................2 4.SINGLE CHANNEL RECEIVER FEATURES......................................3 5.DUAL CHANNEL RECEIVER FEATURES..........................................4 6.TRANSMITTER FUNCTION & FEATURES........................................5 7.
8 8 5 6 2 ANT.A 6 3 6 2 ANT.A ANT.B 4 7 7 10 11 1 9 12 ANT.B 5 4 3 10 11 4 5 1 9 12 10 1.Power Switch: Power ON/OFF the receiver. 1.Power Switch: Power ON/OFF the receiver. 2.Power Indicator: Indicate the power ON/OFF. 2.Power Indicator: Indicate the power ON/OFF. 3. LCD Information Display: Show the receiver frequency channel ect. 3. LCD Information Display: Show the receiver frequency channel ect. 4.Down Function Button: Sets channel data. 4.
1 1 3 ON OFF 2 4 3 ON 2 4 5 5 6 1. Power and Audio Mute Switch. 2. Antenna: Transmit the RF signal of transmitter. 3. Belt Clip: Attach the transmitter to the belt. 4. Audio Input Jack: it is suitable for lavalier system/headset system. 5. Low Battery Indicator: Red light glows when it is lack of power and should renew the battery. 6. LCD Information Display: Show the transmitter frequency channel ect. 7. Gain Adjusting Volume: Adjust the transmitter audio input gain. 8.
BODYPACK TRANSMITTER CONNECTION 1. Lavalier Microphone Connection: Connect the connecter of supplied Lavalier microphone to the connecting jack of transmitter (Shown as below) Set the transmitter work state in wireless lavalier system. 2. Headset Microphone Connection: Connect the connecter of supplied Headset microphone to the connecting jack of transmitter(Shown as below) Set the transmitter work state in wireless headset system. TRANSMITTER BATTERY INSTALLATION 1.
13-15 300mA/500mA 185MM X 145MM X 43MM X2 7 238MM X 50MM X 50MM 250MM X 51MM X 51MM X2 7 100MM X 65MM X 30MM 9 10
FCC warning statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement.
