Operating Instructions

5 6
TRANSMITTER BATTERY INSTALLATION
1. Battery Installation of Handheld Microphone: Open the battery cover,
Insert the supplied batteries into battery jar in polarity and cover the battery
Rotate
counterclockwise
to open.
2. Battery Installation of Bodypack Transmitter or Conference Microphone:
Push open the battery cover, Insert the supplied batteries into battery jar in
polarity and close the battery cover.
Push down
to open.
Push down
to open.
BODYPACK TRANSMITTER CONNECTION
1. Lavalier M i c r o p h o n e C o n nection: Co n n e c t t h e c o n n ecter of supp l i e d
lavalier microphone to the connecting jack of transmitter (shown as below)
Set the transmitter work state in wireless lavalier system(L).
2. Hea d s e t Micro p h one Con n e c tion: C o n n ect th e c o n necte r o f s uppli e d
headset microphone to the connecting jack of transmitter(shown as below)
Set the transmitter work state in wireless headset system(H).
3.Guitar Cable Conne ction: Co nnect the connecter of supplied guitar cable
to the connecting jack of transmitter and the other connecter to guitar(sh own
as below), set the trans mitter work sta te in wireless guitar system(G).
CONFERENCE MICROPHONE CONNECTION
1.Insertthemicrophoneunitintotheconnection
holeoftheconferencingunitandtighten
clockwise.
2.LongpressthePOWERbuttontoturnonthe
conferencemicrophone,andthe lightof
microphonewillbeilluminated.
3.Select the appropriate channel with the UP button
and the DOWN button
4.Short press POWER button to switch mute state
(The light of microphone is off) and normal state.