Product Manual

3
to produce products that exceed customer expectations. We
hope you enjoy your Kasco Aerator or Water Circulator.
Unit Specs
Model Voltage Operating
amps
lock rotor
amps
single phase aerators
2400AF 115 5 @115V 12@115V
3400AF 115 6.7 @115V 18@115V
3400HAF 208-240 3.4 @240V 9@240V
4400AF 115 11.3@115V 40@115V
4400HAF 208-240 5.7@240V 20@240V
8400AF 208-240 9.0 @240V 40@240V
3.1AF 208-240 10.7 @240V 63@240V
5.1AF 208-240 18 @240V 97@240V
3 phase aerators
2.3AF 208-230 4.5 @ 230V 40
3.3AF 208-230 8.2 @ 230V 70
5.3AF 208-230 13 @ 230V 100
2.3HAF 460 2.3 @ 460V 20
3.3HAF 460 4.1 @ 460V 35
5.3HAF 460 6.5 @ 460V 50
Single phase circulators
2400CF 115 5@115V 12@115V
3400CF 115 6.7@115V 18@115V
3400HCF 208-240 3.4@240V 9@240V
4400CF 115 11.3@115V 40@115V
4400HCF 208-240 5.7@240V 20@240V
8400CF 208-240 9.0@240V 40@240V
2400AF, 3400AF/HAF, 4400AF/HAF Parts
# Item Part# Qty
1 Aerator 1
2 Float 242003 1
3 1/4-20 x 3 1/2” Phillips Pan
Head Screw
251210 3
4 1/4” split washers 840537 3
5 1/4” (3/4” outer diameter) Flat
Washer
251300 3
6 Float Retaining Clips 222995 3
Optional: (bottom screen installation parts 7-12)
7 3/8”-16 x 2-1/2” Hex Head Bolt 820095 2
8 3/8” Flat Washer 462216 4
9 Bottom Screen cushions 241006 4
10 Bottom Screen 990162 1
11 Bottom Screen Clips 223240 2
12 3/8”-16 Nylon Lock Nut 462214 2
# Item Part# Qty
Not pictured:
Mooring ropes 990700 3
Mesh screen (optional) 990170 1
cable ties (optional) 415038 10
3 4
5
7
8
2
1
6
9
10
11
8
12
Optional Equipment
• Control Box (C-25 for 120V units or C-85 for 240V
units in separate box) (1 - optional)
• Bottom Screen with mesh and Hardware for Small
Float Ring (1 - optional)
NOTE: Extra hardware may be included.
POND AERATOR TOOLS & SUPPLIES NEEDED
• Anchors or stakes for installing unit (2 or 3 depending
on unit)
• # 2 Phillips head screw driver
• Two (or 3 depending on model) 12” pieces of 1” galva-
nized pipe for weighting ropes (optional)
• #10 x 1” long or longer screw(s) for mounting the op-
tional C-25 (3) or C-85 (4)
• 9/16” Socket and Ratchet (for optional bottom
screen)
• 9/16” Wrench (for optional bottom screen)
• Nylon Tie for cord