Product Manual

3
Unit Specs
Model Voltage Amps Lock
rotor
amps
Control
box con-
nection
Aerator
connec-
tion
single phase
aerators
2400VFX 110-120 5.6 12 C-25
plug in
Plug into
C-25
3400VFX 110-120 7.3 18 C-25
plug in
Plug into
C-25
3400HVFX 208-240 3.7 9 Hardwire
C-85
plug into
or hard-
wire C85
4400VFX 110-120 11.3 40 C-25
plug in
Plug into
C-25
4400HVFX 208-240 5.7 20 Hardwire
C-85
plug into
or hard-
wire C85
8400VFX 208-240 11 40 Hardwire
C-85
plug into
or hard-
wire C85
5.1VFX 208-240 20 97 Hardwire
C-95
hardwire
C95
3 phase
aerators
2.3VFX 208 7.5 40 see your control
panel instructions
5.3VFX 208 16.0 100
2.3HVFX 460 3.6 24 see your control
panel instructions
5.3HVFX 460 7.8 49
VX Pattern Sizes
NOTE: Pattern sizes listed are approximate. Varia-
tions in voltage caused by regional electrical differenc-
es or voltage drop due to long power cords may result
in reduced pattern sizes.
Model Height Width
2400VFX 5’ 15’
3400VFX 6’ 21’
3400HVFX 6’ 21’
4400VFX 8’ 26’
4400HVFX 8’ 26’
8400VFX / 2.3(H)VFX 8’ 32’
5.1VFX / 5.3(H)VFX 9’ 34’
important to test the GFI breaker in the control panel
upon each installation/reinstallation of the unit to en-
sure proper functioning.
WARRANTY
Kasco aerators are the result of over 35 years of design
and engineering. Kasco products are built to with-
stand the toughest conditions. Kasco Marine backs
each VFX model aerator with either a 2 Year or 3 Year
Warranty depending on the model. This warranty cov-
ers any and all manufacturers defects within the war-
ranty period from the date of purchase (See Warranty
Section). Please register your aerator online at:
www.kascomarine.com (under the technical tab)
USE AND OPERATION
Kasco aerators are designed and engineered for con-
tinuous duty, such as on sh farms or other aquacul-
ture applications, or on-demand use, as needed in a
recreational water feature.
During otation operation, the water is pulled from
360
O
around the unit and from below the unit. The
water is pulled upward and thrust through the otation
collar into the air.
Your Kasco Marine aerator is ready for immediate use
(after installation). Make sure to keep the motor hous-
ing clean from hard water deposits and/or algae. (See
Maintenance Recommendations.)
It is extremely important that proper and sufcient
voltage is supplied to the aerator motor. Unit should
be protected by a GFCI. Control panels must be
installed by a qualied electrician. (See Installation
instructions).
Kasco aerators are lightweight, energy efcient, and
easy to install and operate. We strive to produce prod-
ucts that exceed customer expectations. We hope you
enjoy your Kasco aerator.
UNIT STORAGE
When storing units during the offseason, it is impor-
tant to store them upside down if they are going to be
sitting for long periods of time. Units that sit upright
on a shelf for many months, or even years have a
greater likelihood of seals drying out. Storing upside
down will ensure oil is lubricating the seals and pre-
vent drying.