Product Manual
Table Of Contents
1/2HP-1HP AERATOR & CIRCULATOR MANUAL
10
4. Angle the unit as desired by aligning one of the three the holes in the anges with the corresponding
holes in the brackets. Secure the can strap to the brackets with the 3/8”-16 x 1” serrated ange screw (F)
and 3/8”-16 serrated ange nut (G) to x the unit in one of the angles below.
5. Place the oat on a stable surface with the at side down and use four 1/4”-20 x 1/2” serrated ange
screws (E) to secure the mounting brackets (B) to the oat.
Upward angle: Align the brack-
et and ange holes furthest
from the cage to angle the unit
toward the oat in the water
(below).
No angle: Align the center holes
in the brackets and anges to
angle the unit straight ahead in
the water (below).
Downward angle: Align the
bracket and ange holes closest
to the cage to angle the unit
away from the oat in the water
(below).
ASSEMBLY INSTRUCTIONS (CIRCULATOR, CONT.)
G
F
F
G
F
G
E
B
Back to Contents