User's Manual

KA300 Wireless Router User Manual
9
5. On the “ Gateway” tab, set a new gateway as 192.168.1.1, and then click
“ Add” .
6. Configure the “ DNS” tab if necessary. For information on the IP address of
the DNS server, please consult with user’ s ISP.
7. Click “ OK” twice to confirm and save user’ s changes.
8. User will be prompted to restart Windows. Click “ Yes” .
4.2 Local PC Configuration in Windows 2000
1. In the Windows task bar, click the “ Start” button, point to “ Settings” , and
then click “ Control Panel” .
2. Double-click the “ Network and Dial-up Connections” icon.
3. In the “ Network and Dial-up Connections” window, right-click the “ Local
Area Connection” icon, and then select “ Properties” .
4. Highlight “ Internet Protocol (TCP/IP)” , and then click “ Properties” .
5. In the “ Internet Protocol (TCP/IP) Properties” dialog box, set the IP address
as 192.168.1.x (x can be a decimal number from 2 to 254.), and the subnet
mask as 255.255.255.0 and the default gateway as 192.168.1.1. Then click
“ OK” .
6. Configure the “ DNS” tab if necessary. For information on the IP address of
the DNS server, please consult with user’ s ISP.
7. Click “ OK” twice to confirm and save user’ s changes.
4.3 Local PC Configuration in Windows Vista
1. Go to Start. Click on Network.
2. Then click on Network and Sharing Center at the top bar.
3. When the Network and Sharing Center window pops up, select and click
on Manage network connections on the left window column.
4. Select the Local Area Connection, and right click the icon to select
Properties.
5. Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.