User's Manual

KA300 Wireless Router User Manual
10
6. In the TCP/IPv4 properties window, select the Obtain an IP address
automatically and Obtain DNS Server address automatically radio buttons.
Then click OK to exit the setting.
7. Click OK again in the Local Area Connection Properties window to apply
the new configuration.
4.4 Local PC Configuration in Windows 7
1. Go to Start. Click on Control Panel. Then click on Network and Internet.
2. When the Network and Sharing Center window pops up, select and click
on Change adapter settings on the left window panel.
3. Select the Local Area Connection, and right click the icon to select
Properties.
4. Select Internet Protocol Version 4(TCP/IPv4) then click Properties.
5. In the TCP/IPv4 properties window, select the Obtain an IP address
automatically and Obtain DNS Server address automatically radio buttons.
Then click OK to exit the setting.
6. Click OK again in the Local Area Connection Properties window to apply
the new configuration.
5 Quick Setup of the Router
In order to use the web-based management software, it will be necessary to use a
computer that occupies the same subnet as the Router. The simplest way to do this for
many users will be to use DHCP server that is enabled by default on the Router.
please make sure the wan connection is ok.
Internet Connection Setup Wizard will guide you through a step-by-step process to
configure your router and connect to the Internet.ill guide you through a step-by-step
process to configure your router and connect to the Internet.