User's Manual

KW55293 Wireless Router User Manual

5.1.2 Network (WANSettings)

KW55293 supports three types WAN connection.they are DHCP,Static

IP,PPPOE, Select any of them you will be able to configure the corresponding

connection of WAN. Choose menu “Setup

→Internet Setup”, you can

configure the IP WAN parameters

5.1.3 DHCP

If your ISP provides the DHCP service, please choose Dynamic IP type, and the

Router will automatically get IP parameters from your ISP. You can see the page

as follows . This page displays the WAN IP parameters assigned dynamically by

your ISP, including IP address, Subnet Mask, Default Gateway,

Host Name - This option specifies the Host Name of the Router.

Domain Name -

If your ISP gives you one or two DNS addresses,enter the

addresses into the correct fields. Otherwise, the DNS servers will be assigned

dynamically from your ISP.

MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet

networks is 1500 Bytes. It is not recommended that you change the default MTU Size

unless required by your ISP.

Click the Apply Changes button to save your settings.