User's Manual

KW55293 Wireless Router User Manual
15
Domain Server - If your ISP gives you one or two DNS addresses,enter the addresses into
the correct fields. Otherwise, the DNS servers will be assigned dynamically from your ISP.
MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is
1500 Bytes. It is not recommended that you change the default MTU Size unless required by
your ISP.
Click the Apply Changes button to save your settings.
5.1.6 LAN Settings
Choose menu “ Setup → Local Network ”, you can configure the IP parameters of
the LAN on the screen as below.
IP Address:Enter the IP address of your Router or reset it in dotted-decimal notation
(factory default: 192.168.0.1).
Subnet Mask:An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Click the Apply Changes button to save your settings.
 Note:
1) If you change the IP Address of LAN, you must use the new IP Address to log in
the Router.
2) If the new LAN IP Address you set is not in the same subnet, the IP
Address pool of the DHCP server will change accordingly at the same
time，while the Virtual Server and DMZ Host will not take effect until they
are re-configured.