User's Manual

KW55293 Wireless Router User Manual

5.2 Wireless Settings

There are five submenus under the Wireless menu (shown as bellow): Wireless Basic

MBSSID ,WPS, Wireless Advanced, Wireless Repeater. Click any of them, and you

will be able to configure the corresponding function.

5.2.1 Basic Wireless Settings

Choose menu “Wireless

→Wireless Basics”, you can configure the basic settings

for the wireless network on this page.

Name

（SSID）： Also called the SSID. Enter a value of up to 32 characters. The same

name must be assigned to all wireless devices in your network .

Band Width :Select the channel width from the drop-down list. The default setting is

40MHz in Both Bands, which can adjust the channel width for your clients automatically.

Channel:This field determines which operating frequency will be used. The default

channel is set to Auto, so the AP will choose the best channel automatically. It is not

necessary to change the wireless channel unless you notice interference problems with

another nearby access point.

SSID Broadcast: When wireless clients survey the local area for wireless networks to

associate with, they will detect the SSID broadcast by the Router. If you select the Enable

SSID Broadcast checkbox, the Wireless Router will broadcast its name (SSID) on the air.