User`s guide

30 Kaspersky Mobile Security 7.0 Enterprise Edition
You can update bases manually or according to a schedule. Updates are
performed from Kaspersky Lab's servers via internet.
You can enable automatic anti-virus scan of your device after each update of the
Kaspersky Mobile Security bases. In order to do it, switch to Settings item in the
Updater tab and assign value On to the Scan on Update item.
The value of the Scan Quar. on Update setting determines whether or not
objects in the quarantine will be rescanned each time after the application bases
have been updated. By default the scan is performed. If you do not wish the scan
to be performed, select Off.
If it is necessary to change the active access point, use the Access point
setting. Then select the require value in the list. By default the access point is the
default point of the device.
The value of the Update server setting determines the application bases update
source: Kaspersky Lab's update servers (Use default value) or another server
specified by the user (User defined value). If you selected the User defined
value, enter the URL in the window that will open. If required, you can specify an
alternative update server.
You can view detailed information about bases used in the Database Info item in
the Information tab.
Information about bases update will be entered into the log. In order to view the
log, select the Reports item in the Updater tab.
2.1.8.1. Updating settings
In order to configure application bases updates, perform the following actions:
1. Start Kaspersky Mobile Security (see section 2.1.1 on page 9).
2. Switch to the Settings item in the Updater tab (see Figure 18).