User`s guide

52 Kaspersky Mobile Security 7.0 Enterprise Edition
When you access the module settings for the first time you will have to set up a
password. Using this password you can obtain access to the module's settings
and activate the module functions. The password is required in order to prevent
unauthorized access to the module operation settings and to enable the user to
block and erase information saved on the device in case it is stolen or lost.
SMS-Block function – allows blocking the device at the user's discretion. You
can unblock the device only after you enter a password used to access the Anti-
Theft module. The action of this function gets triggered after the user sends an
SMS message “block:code” to the device that got lost.
SMS-Clean allows erasing user's personal information (contact, incoming
messages, personal files, network connection settings). The action of this
function gets triggered after the user sends an SMS message “clean:code” to the
device that got lost.
The SIM Watch allows sending a new phone number to the specified numbers in
case the device is lost and then – block this device. You can unblock the device
by entering the password set up to access the Anti-Theft module.
If it is necessary to change the password used to work with Anti-Theft module,
select the Change code item. Enter the new password and its confirmation and
press the OK button.
Figure 36. The Anti-Theft section
Information about the Anti-Theft module's work will be entered into the
application log. To view the log, select the Report item in the Anti-Theft section.