User`s guide

Kaspersky Mobile Security for Symbian OS 13
2.1.4.1. Real-time protection and on-demand
scan
Real-time protection is the mode of operation in which the resident part of
Kaspersky Mobile Security is constantly loaded in the device's RAM and
monitors all data including the incoming data received by the device.
Real-time protection is started since the moment the device is turned on and
works until it is turned off (if the use of this mode was not disabled by the
protection settings).
Kaspersky Mobile Security also allows to perform a full scan of the device's file
system including the analysis of objects located on the connected memory
expansion cards.
Information about the results of the Real-time protection and of the on-demand
scan will be recorded in the report. In order to view the report, select the Reports
item in the Scanner tab.
To start Real-Time protection, do the following:
1. Select the Settings item in the Scanner tab.
2. Select the Monitor Settings in the Settings section.
3. Enable / disable Real-Time protection by setting the Real-time protec-
tion setting certain value to a corresponding value.
To modify the Real-Time protection operation settings, do the following:
1. Select the Settings item in the Scanner tab.
2. Select the Monitor Settings in the Settings section.
3. Define the scan area in the Scan Mask block by selecting the file types
to be scanned:
All files – scan all files.
Executable files – scan only executable program files (for example
*.exe, *.sis, *.mdl, *.app).
4. Determine the action to be performed when an infected object has been
detected (the Virus Found Fction setting).
By default detected malware objects are placed into quarantine (the
Quarantine setting value).
To ensure that information about detection of an infected object is
logged in the application’s report, select value Log event.