User guide

U S E R G U I D E

236

STOPPING THE APPLICATION

Command syntax:

avp.com EXIT /password=<your_password>

Parameters description is provided in table below.

<your_password>

Application password specified in the interface.

Note that this command is not accepted without a password.

MANAGING APPLICATION COMPONENTS AND TASKS

Command syntax:

avp.com <command> <profile|task_name> [/R[A]:<report_file>]

avp.com STOP <profile|task_name> /password=<your_password> [/R[A]:<report_file>]

Descriptions of commands and settings are given in the table below.

You can manage Kaspersky Small Office Security components and tasks from the

command prompt with the following commands:

START – start a protection component or a task.

STOP – stop a protection component or a task.

STATUS – display the current status of a protection component or a task.

STATISTICS – output statistics to the screen for a protection component or a task.

Note that the STOP command will not be accepted without a password.

<profile|task_name>

You can specify any protection component of Kaspersky Small Office Security, component

module, on-demand scan or update task as the value for the <profile> setting (the

standard values used by the application are shown in the table below).

You can specify the name of any on-demand scan or update task as the value for the

<task_name> setting.

<your_password>

Application password specified in the interface.

/R[A]:<report_file>

/R:<report_file> – log only important events in the report.

/RA:<report_file> – log all events in the report.

You can use an absolute or relative path to the file. If the setting is not defined, scan

results are displayed on screen, and all events are shown.